Kerio Operator PBX

To register your Kerio Operator PBX with SIP.US, please follow these steps:

1. Log in to the web administration interface of Kerio Operator.
2. Go to Configuration -> Call Routing.
3. Click Add a SIP Interface.
4. Enter an interface name (e.g. "SIP.US”).
5. Choose New provider and enter your telephone number (use a comma to separate multiple phone numbers).
6. Click Next.
7. Choose the extension to receive incoming calls.
8. Enter a dial out prefix if necessary.
9. Click Next.
10. Specify the hostname provided by SIP.US (gw.sip.us) and the default port 5060.
11. Specify the Username (Trunk #) and Password (Password) values as provided by SIP.US.
12. Enable User ID differs from the telephone number and enter your SIP.US Trunk #.
13. Enable the option Register with registrar.
14. Click OK.

When you have finished these steps your configuration should look similar to the image below: